Machining daidaito na CNC lathe

1. Daidaitaccen kayan aikin injin: idan mafi ƙarancin daidaiton kayan aikin injin shine 0.01mm, ba za ku iya sarrafa samfuran tare da daidaiton 0.001mm akan kayan aikin injin a kowane hali.

2. Clamping: zaži dace clamping tsari bisa ga workpiece abu, tare da matsakaici clamping karfi. Misali, ana amfani da “sama daya da matse daya” wajen sarrafa dogayen igiyoyi, kuma ana amfani da firam na tsakiya ko mariƙin kayan aiki. Yi amfani da katse mai laushi ko buɗaɗɗen zobe don sarrafa hannun rigar bangon bakin ciki.

3. Cutter: zaɓi madaidaicin madaidaicin da kusurwar madaidaiciya daidai gwargwadon yanayin kayan da za a sarrafa. Kuma kula da kayan aikin kayan aiki a lokacin aiki.

4. Gudanarwa: haɓaka fasahar sarrafawa ta dace bisa ga kaddarorin kayan. Don jujjuyawar juyi, juye juye juye juye da ƙarewa, adadin guntu daban-daban da adadin abinci za a zaɓi a matakai daban-daban; a cikin aikin injin, sanyaya kuma yana da mahimmanci, kuma za a zaɓi mai sanyaya mai dacewa (ruwa saponification, emulsion, mai, da dai sauransu) bisa ga kayan aiki da kayan aikin yanke.

5. Don sarrafa gwaji, za a yi gyare-gyare bisa ga kayan da aka gama.

www.anebon.com