CNC Juya Machine

(1) Nau'in lathe
Akwai nau'ikan lathes da yawa. Dangane da ƙididdigar ƙ ƙidasta na injiniya na ƙirar injiniya, akwai nau'ikan yau da kullun guda 77: Lates na atomatik, ɗakunan ƙarfe na atomatik, dawo da ƙafafun, ko jirgin ruwa mai zuwa. Crankshaft da camshaft lathes, a tsaye lathes, bene da kuma kwance lathes, profiling da Multi-kayan kaya, axle Roll, da shebur lathes, da dai sauransu, wanda aka raba zuwa da yawa kananan sassa; adadin ya banbanta, kuma ana amfani da lathes a tsaye da kuma a kwance a cikin masana'antar injin mu, kuma ana iya ganin waɗannan nau'ikan lanƙwasa guda biyu a kusan duk wuraren da aka kera.CNC machining part

(2) Iyakar sarrafa lathe
Muna zabar nau'ikan lathe da yawa na yau da kullun don gabatar da iyakokin Processingg.aluminum part
Ana iya amfani da lathe a kwance don jujjuya filaye na ciki da waje na cylindrical da filaye mai mazugi, samar da filaye masu juyawa da ramuka, jujjuyawar sassan, da zaren daban-daban, ana iya hako shi, sake gyarawa, sake kunnawa, tapping, zaren, da kuma knurledProcessingg na sauran matakai. Ko da yake matsakaicin lathe a kwance yana da ƙananan digiri na sarrafa kansa da kuma babban adadin lokaci na taimako yayin aikin injin, wannan kayan aikin na'ura an yi amfani da shi sosai kuma ya shahara a cikin masana'antun masana'antu saboda yawan sarrafa kayan aiki da kuma kyakkyawan aiki na gaba ɗaya. Yana daya daga cikin wakilan sarrafa kayan aiki na masana'antar injin mu kuma ɗayan kayan aiki masu mahimmanci a cikin masana'antar injin.bakin karfe part
B. Lathe a tsaye ya dace don sarrafa kowane nau'in firam da sassan harsashi da sarrafa saman cylindrical na ciki da na waje, saman conical, fuskokin ƙarshen, tsagi, yankan da hakowa, faɗaɗa da reaming na sassa daban-daban. Ana iya aiwatarwa, kamar zaren zaren, ƙarshen fuska, bayanin martaba, niƙa, da niƙa, ta amfani da ƙarin na'urori.

(3) Machining daidaito na lathe
A. Daidaitaccen mashin ɗin da aka saba a kwance a kwance shine kamar haka:
Zagaye: 0.015 mm; Silindricity: 0.02/150 mm; Lalata: 0.02 / ¢ 150 mm; Tsayin yanayi: 1.6 Ra/μm.
B. Daidaiton machining na lathe a tsaye shine kamar haka:
Zagaye: 0.02 mm; Silinda: 0.01 mm; girman kai 0.03 mm.
Daidaitaccen aiki na sama ƙaƙƙarfan tunani ne kawai kuma baya nufin duk lathes sun cika. Yawancin kayan aikin lathe suna da takamaiman adadin sama da ƙasa bisa ga takamaiman buƙatun masana'anta da takamaiman yanayin taron. Har yanzu, komai girman adadin mai iyo, ƙimar daidaiton aiki dole ne ya cika buƙatun ƙa'idodin ƙasa don irin waɗannan kayan aikin. Idan daidaiton buƙatun sarrafa kayan aikin bai kai matsayin ƙasa ba yayin siyan kayan aikin, mai siye yana da haƙƙin ƙin karɓa da biyan kuɗi.

 

CNC Machined Anodized Parts, CNC Machined Spare Parts, CNC Milled Auto Parts, CNC Milled Auto Component s, CNC Juya Motoci ts, CNC Juya Mota Parts

Abubuwan da aka bayar na Anebon Metal Products Co., Ltd.
Skype: jsaonzeng
Wayar hannu: + 86-13509836707
Waya: + 86-769-89802722
Email: info@anebon.com

Da fatan za a zo shafinmu don ƙarin bayani. www.anebon.com

 


Anebon Metal Products Limited na iya samar da mashin ɗin CNC, simintin gyare-gyare, sabis na ƙirar ƙarfe, da fatan za a iya tuntuɓar mu.
Tel: +86-769-89802722 Email: info@anebon.com Website : www.anebon.com


Lokacin aikawa: Yuli-20-2019
WhatsApp Online Chat!