China Heat sink, Aluminom 6061 Extrusion na CNC Machined Part na Passivatiom Surface Ọgwụgwọ na Global Sources

NchNhr ọdịnaya
●Okwu mmalite
●Nkọwa nke Aluminom 6061
●Usoro nrụpụta maka ikpo ọkụ Aluminom
●Ntụle nke usoro nrụpụta
●Ọgwụgwọ dị n'elu: Passivation
>>Uru nke Passivation
●Ngwa nke Aluminom 6061 Heat Sinks
●Mmechi
●Ajụjụ A na-ajụkarị (FAQ)

Okwu mmalite

N'ebe a na-ahụ maka njikwa ọkụ, aluminom na-ekpo ọkụ ọkụ na-arụ ọrụ dị mkpa n'ịgbasa ọkụ site na ngwa eletriki, na-eme ka arụmọrụ dị mma na ogologo ndụ. N'ime ihe dị iche iche aluminom alloys, 6061 pụtara n'ihi na ya magburu onwe n'ibu Njirimara na versatility. Isiokwu a na-abanye n'ime usoro nrụpụta, uru, ngwa, na ọgwụgwọ elu nke aluminum 6061 okpomọkụ sinks, karịsịa na-elekwasị anya na extrusion na CNC machining techniques. Ọzọkwa, anyị ga-enyocha mkpa ọgwụgwọ elu pasivation pụtara na ịkwalite nguzogide corrosion.

Nkọwa nke Aluminom 6061

Aluminom 6061 bụ ihe mmiri ozuzo siri ike na-eme ka ọ bụrụ nke magnesium na silicon mejupụtara. A maara ya maka ya:

- Ike dị elu na oke ibu - Nguzogide corrosion mara mma - ezigbo weldability na machinability

Ngwongwo ndị a na-eme ka ọ bụrụ nhọrọ dị mma maka ngwa dị iche iche, gụnyere ikuku ikuku, ụgbọ ala, na ngwá electronic.

 

Usoro nrụpụta maka ikpo ọkụ Aluminom

Usoro extrusion

Extrusion bụ otu n'ime ụzọ ndị a na-ahụkarị maka imepụta ihe mkpuchi aluminom. Usoro a gụnyere ịmanye billet aluminom kpụ ọkụ n'ọnụ site na ịnwụ iji mepụta profaịlụ akọwapụtara.

- Uru: - ọnụ ahịa dị oke ọnụ maka mmepụta ihe dị ukwuu - Izi ezi akụkụ dị elu - Ikike ịmepụta ụdị mgbagwoju anya na akụkụ dị iche iche dị iche iche.

- Oke: - Ihe siri ike inweta nku dị oke mkpa ma ọ bụ ogologo - Mgbanwe imewe nwere oke ma e jiri ya tụnyere ụzọ ndị ọzọ.

Ụlọ ọrụ CNC

CNC (Njikwa ọnụọgụ Kọmputa) bụ ụzọ ọzọ a na-eji emezi profaịlụ aluminum extruded ka ọ bụrụ nke ziri ezi.

- Uru: - Oke nkenke na nkwughachi - ikike imepụta geometry dị mgbagwoju anya - Mgbanwe na mgbanwe nhazi.

- Oke: - Ọnụ ahịa mmepụta dị elu ma e jiri ya tụnyere extrusion - Ogologo oge ndu maka akụkụ omenala

Ntụle nke usoro nrụpụta

Njirimara	Extrusion	Ụlọ ọrụ CNC
Ọnụ	Belata maka nnukwu mpịakọta	Dị elu n'ihi oge nhazi
Nkenkenke	Na-agafeghị oke	Elu
Ime mgbanwe imewe	Oke	Ọbara
Ọsọ mmepụta	Ngwa ngwa	Jiri Nwayọọ
Akpa eji eme ihe kacha mma	Profaịlụ ọkọlọtọ dị elu	Ụdị omenala ma ọ bụ mgbagwoju anya

 

Ọgwụgwọ dị n'elu: Passivation

Passivation bụ ọgwụgwọ kemịkalụ na-eme ka nguzogide corrosion nke elu aluminom dịkwuo elu. Usoro a na-agụnye ịmepụta oyi akwa oxide na-echebe nke na-egbochi oxidation ma gbasaa ogologo ndụ nke ikpo ọkụ.

Uru nke Passivation

- Ịba ụba nke ogologo oge: Na-echebe megide ihe ndị metụtara gburugburu ebe obibi nke nwere ike iduga corrosion .- Mma mma Aesthetics: Na-enye nhazi otu nke na-eme ka ọdịdị ahụ dịkwuo mma.

Ngwa nke Aluminom 6061 Heat Sinks

A na-eji ihe mkpuchi ọkụ aluminom 6061 eme ihe n'ofe ụlọ ọrụ dị iche iche n'ihi ikike njikwa ọkụ ha dị irè. Ngwa nkịtị gụnyere:

- Igwe ọkụ eletrik: Ejiri ya na CPUs, GPUs na transistor ike. Eletrọnịkị jụrụ oyi

- Ọkụ ọkụ LED: Ihe dị mkpa maka ịgbasa ọkụ na ihe ndozi LED. Ọkụ ọkụ LED

- Akụrụngwa akpaaka: Ejiri n'ọrụ n'ụgbọ ala eletrik na injin arụ ọrụ dị elu. Ngwa akpaaka

Mmechi

Aluminom 6061 extrusions jikọtara ya na CNC machining na-enye ngwọta siri ike maka ikpochapụ ọkụ dị irè na ngwa dị iche iche. Nzọụkwụ ọzọ nke passivation na-eme ka ịdịte aka na arụmọrụ nke ikpo ọkụ ọkụ ndị a na-eme ka ha bụrụ nhọrọ kachasị mma na ụlọ ọrụ na-achọ ngwọta nchịkwa okpomọkụ a pụrụ ịdabere na ya.

 

Ajụjụ A na-ajụkarị (FAQ)

Q1: Gịnị bụ isi uru nke iji aluminum n'elu ọla kọpa maka okpomọkụ sinks?

A1: Aluminom dị ọkụ, dị ọnụ ala ma dị mfe ịpụ n'ụdị mgbagwoju anya ma e jiri ya tụnyere ọla kọpa. Ọ bụ ezie na ọla kọpa nwere conductivity thermal ka mma, arụmọrụ aluminom n'ozuzu ya n'ihe gbasara ịdị arọ na ọnụ ahịa na-eme ka ọ bụrụ ihe ewu ewu maka ọtụtụ ngwa.

Q2: Olee otú passivation si eme ka arụmọrụ nke aluminom okpomọkụ sinks?

A2: Passivation na-emepụta oyi akwa oxide na-echebe n'elu aluminom nke na-eme ka nkwụsị nke corrosion dịkwuo elu. Ọgwụgwọ a na-enyere aka ịnọgide na-enwe conductivity thermal site na igbochi oxidation nke nwere ike imebi arụmọrụ ka oge na-aga.

Q3: Enwere ike ịhazi ikpo ọkụ aluminom?

A3: Ee, aluminom okpomọkụ sinks nwere ike ahaziri site ma extrusion na CNC machining usoro izute kpọmkwem imewe chọrọ ma ọ bụ akụkụ dị mkpa site dị iche iche ngwa.