Trampoline Knowledge

Definition of trampoline: Machine tools with prefabricated holes are mainly machined on the workpiece with a file. Subject: Mechanical Engineering (a subject); cutting process and equipment (two subjects); metal cutting machine tools - various metal cutting machine tools (three subjects) CNC turning part 

The trampoline is mainly a machine tool that boring a workpiece with a dull tool. Usually, the dull tool rotates as the main motion, and the dull tool or the workpiece moves into the feed motion. Its processing accuracy and surface quality are higher than those of the drilling machine. The trampoline is the leading equipment for the processing of large box parts. CNC machining part

 

Machining features: During the machining process, the workpiece does not move, let the tool move, the tool center is aligned with the center of the hole, and the tool is rotated (main motion).

 

(1) Horizontal trampoline

 

It is the most widely used one in trampolines. It is mainly hole processing; the pupil precision is up to IT7, and the surface roughness Ra is 1.6-0.8um. The main parameter of the horizontal boring machine is the spindle diameter.

 

(2) Coordinate trampoline

 

A coordinate boring machine is a type of high-precision machine tool. Its structural feature is that it is a precision measuring device with a coordinate position. The coordinate trampoline can be divided into a single-column coordinate boring machine, a double-column coordinate boring machine, and a horizontal coordinate boring machine.CNCc

 

Single-column coordinate boring machine: The main shaft drives the tool to rotate the main motion, and the main shaft sleeve moves in the axial direction. Features: Simple structure, easy operation, especially suitable for processing precision holes of plate-shaped parts, but its rigidity is poor, so this structure is only suitable for small and medium-sized coordinate boring machines.

 

Double-column coordinate boring machine: The main shaft is mounted on the main shaft for movement. The workpiece is mounted on the worktable and moves linearly along the table along the guide rail. It has good rigidity and is currently used in large-scale coordinate boring machines. The main parameter of the two-column coordinate boring machine is the work surface width.

 

Horizontal coordinate boring machine: The table can rotate in the horizontal plane. The feed motion can be realized by the table's longitudinal movement or the spindle's axial movement. Its processing accuracy is high.

 

(3) King Kong trampoline

 

A low feed rate and high cutting speed characterize it. Therefore, the processed workpiece has high dimensional accuracy (IT6), and the surface roughness can reach 0.2 microns any project please send the drawing to us at info@anebon.com