The ten most commonly used jigs in CNC

Fixture refers to the device used to fix the processing object in the process of mechanical manufacturing, so that it occupies the right position to accept construction or detection. In a broad sense, any process in the process, which is used to install workpiece quickly, conveniently and safely, can be called fixture. cnc machining part

 

10th place: dividing head

 

 
The scenery that used to be like that is now in decline. It's all caused by the indexing spindle. So please yield to the tenth place. machined part

 
Ninth place: air cylinder clamp

 

 
The essence of automatic clamping fixture. Among all the fixtures, the laborer should like the pneumatic fixture the most. cnc milling part

 
Eighth place: Spring jacket / barrel

 

 
How to solve the problem of clamping with less handle for various tools? Here you can find the answer.

 

 

Seventh place: magnetic platform

 

 

 
How to make it easier to put the parts without clamping position on the worktable for processing? See how he did it?

 
Sixth place: spindle and handle

 

 

 
The spindle and knife handle are the crystallization of human's top wisdom and cutting-edge technology.

 
Fifth place: vice; and his brother's toast

 

 

 
If the pressing plate can't hold the workpiece, it's necessary to use a vise / toast for clamping.

 
Fourth place: EROWA fixture

 

 

 
It can ensure repeated positioning accuracy of / - 0.002mm. The electrode can't do without it; the four axis machining can't do without it; the five axis machining can't do without it.

 

Want to learn more UG programming, machining technology in group 565120797 can get free information.

 
Third place: combination of T-block, screw, pressing plate and nut

 

 

 
It's very difficult for you to mount the other clamps (for milling machine, machining center) without the combination of T-block, screw, pressing plate and nut. If you don't believe it, try it.

 
Second place: T-type table

 

 

 
Don't look at him in ordinary times. If you find that your machine tool doesn't have a T-shaped worktable, you will be at a loss.

 
First place: chuck