1. Accuracy of machine tool: if the minimum accuracy of machine tool is 0.01mm, you can't process products with an accuracy of 0.001mm on the machine tool in any case.
2. Clamping: select appropriate clamping process according to workpiece material, with moderate clamping force. For example, "one top and one clamp" is used for machining long shafts, and center frame or tool holder is used. Use soft claw or open ring to process thin wall sleeve.
3. Cutter: select the right cutter and the right tip angle according to the nature of the material to be processed. And pay attention to the tool wear during the processing.
4. Processing: develop appropriate processing technology according to material properties. For rough turning, semi finish turning and finish turning, different chip amount and feed amount shall be selected at different stages; in the process of machining, cooling is also very important, and appropriate coolant (saponification liquid, emulsion, oil, etc.) shall be selected according to materials and cutting tools
5. For trial processing, the adjustment shall be made according to the finished products.
| Cnc Aluminum Prototype | White Anodized Aluminum | Cnc Turned Component |
| Cnc Plastic Parts | Machining Shop | Turned Brass Components |
www.anebon.com
Anebon Metal Products Limited can provide CNC machining, die casting, sheet metal machining services, please feel free to contact us.
Tel: +86-769-89802722 Email: info@anebon.com Website : www.anebon.com
Post time: Nov-02-2019