3D Printing and the Circular Economy

CNC machining is a manufacturing process in which pre-programmed computer software dictates the movement of factory tools and machinery. The process can be used to control a range of complex machinery, from grinders and lathes to mills and routers. With CNC machining, three-dimensional cutting tasks can be accomplished in a single set of prompts. CNC refers to computer numerical control. Today, we will be comparing CNC methods to 3D printing and additive manufacturing in terms of their place within a circular economy. CNC machining part

Transportation waste is not as large of a concern when it comes to CNC machining. It is important to have one’s material ready before they are to place the material within a CNC center. The layout of one’s factory or fabrication environment is more critical for this type of waste. Similar thoughts can be arrived at in terms of additive manufacturing. Based on the types of material used for a CNC machine, it is slightly difficult to transport larger amounts of the metals used for these machines. aluminum part

Inventory waste is mostly oriented towards what material you are using for the CNC process. Typically, we are using metal materials. The types of materials typically used consist of brass, copper alloys, aluminum, steel, stainless steel, titanium, and plastics. The type of material is very important because of production needs. CNC machining is a subtractive process. Hence, the various materials will cause different hearings, carving residue, and debris that will be produced during the cutting out of a piece.

Waiting time for CNC machining depends on the feed rate. Feeds specifically refer to the feed rate the tool advances through the material, while speed refers to the surface speed at which the cutting edge of the tool is moving and is needed to calculate the spindle RPM. Feed is generally measured in Inches Per Minute (IPM) in the US, and speed is measured in Surface Feet per Minute. Feed speed,d as well as material densit,y causes the amount of wait time to differ per manufactured part. Part geometry also has a role to play here, as well as hardness. A CNC typically is faster than a 3D printer device, but this is again dependent on material and geometry. aluminum extrusion

Over-processing is not as much of a concern for both of these methods of manufacturing. CNC machining and 3D printing are both great at building quick prototypes of designs. Over-processing can become problematic in CNC when one wants to make very polished cuts of a material to have sharper edges and rounded surfaces. There may be an element of over-processing there that leads to time wasted.

Post-processing is a big issue when it comes to 3D printers. Post-processing issues are not as apparent with CNC parts. They typically are ready for deployment after they have been produced with excellent surface finishes.

Recyclability is apparent with various CNC waste materials post-production. It is important to be constantly aware of the different products used. In order to recycle necessitates the separation of materials. This requires bins oriented towards specific materials labeled clearly near a CNC machine. Without this, most of the scrap will be left unattended and mixed together to the point of difficult separation.

Overall, the differences between CNC machines and 3D printing are considerable. The sheer amount of waste material produced by a typical CNC is way more than a 3D printer. There are efficiency trade-offs associated with 3D printers in terms of speed and material transportation. In the future, advances in additive manufacturing will shrink the gap in terms of creating products in a more sustainable and additive manner versus a subtractive fashion.

This is a brief article based on the differences between 3D printing and CNC machining in terms of waste. Part 6 of this series is on the circular economy.

We’ve got plenty of new products to talk about in today’s 3D Printing News Briefs, starting with materials from two chemical companies. WACKER announced new grades of liquid and...

What Mother Nature has already created, we humans are bound to try and recreate; case in point: biological sensors. Thanks God to good old biomimicry, researchers have made their...

A recent announcement between Royal DSM and Briggs Automotive Company (BAC) should garner interest from the realms of both automotive and technology as they move forward to showcase the benefits...

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third-party vendors.